PlayStation 3 has been one of the major contributors when it comes to the gaming console hype. While a lot of gamers enjoy getting their hands on this gadget, there are a whole range of troubles they often encounter.
One of the most common PS3 problems is the Yellow Light of Death, also known as the YLOD. It is a general error that arises whenever one tries to install a game into the HDD. When the hard drive fails, the YLOD occurs.
Another reason is power surge, along with the dust that had accumulated inside the PS3.
Get The Best Fix For YLOD Here
YLOD is actually an indicator. Notice that before the screen turns yellow, the console’s indicator emits a green light. This should be followed by a quick flash of yellow light, followed by a red screen. The console then automatically shuts down and the owner left with a two hundred dollar-problem.
The best way to get this problem fixed is to bring the console to Sony – that is, if you’re willing to fork out couple of hundred bucks and wait for whole six weeks. Then again, there are quick ways to know how to fix the YLOD that provide several remedies to get the PS3 working again.
The Internet provides numerous materials that give information on how to fix the YLOD. Some are in the form of downloadable digital instructional manuals. Videos showing how to fix the YLOD may also be readily available.
Know that one of the ways to deal with the YLOD is to have a security driver that can replace the PS3 thermal paste with a high quality paste such as arctic silver. According to some self-help Internet sites, this method has been effective only for three percent of owners.
The YouTube community may have also uploaded videos showing ridiculous ways on how to fix the YLOD. Some have recommended using a heat gun for the mother board. Most interestingly, some users have shown ways to fix the problem without actually opening the PS3. One of the methods is to use a hair dryer to heat the system up and sticking the console to the refrigerator for about fifteen minutes.
Reviews have applauded this “home remedy” but no expert has recommended this method, especially since the PS3 would be normally running only for the next two days.
Looking through the other range of options for YLOD troubleshooting, users may also have come across kits that promise a quick fix for PS3 errors and troubles. The instructional manuals and videos have laid out several methods in which users can troubleshoot the YLOD without bringing the console to Sony and spending a fortune. Among the best answers on forums asking how to fix the YLOD are the following:
1. Switch off the Playstation 3 and let it sit for an hour or more to have the system cool down. Turn it back on.
2. Check for loose connections.
3. Remove the hard drive from the console and install it back. For best results, this step can be repeated two to three times. Hard drives are ultra sensitive, though, so there is a need to be extra careful when doing this.
4. Install the system software again.
Remember though that there can be no better way to fix the problem, except bringing the console to professional repairmen from a shop you trust the most. Sony, can of course, give the highest guarantee for fool-proof repair but users with tighter budget can avail more cost-efficient services. Be sure to check on the credentials of the repair shop to avoid bigger PS3 troubles.