Addressing your error problem, the first basic [...]]]> A PS3 disk read error problem can hinder your enjoyment on playing games. The good news is you can fix it by yourself. By doing these, you will save time and money and in no time you will get to the sheer pleasure of playing your favorite games.

Addressing your error problem, the first basic step is to remove the cables from your PS3. From the side, you need to lift the door of your hard drive. Use a Phillips screwdriver to take out the bluish HDD screw from the compartment.

Slide your hard drive to the outside of your Play Station3 and put aside. There is a sticker indicating the warranty. Remove it and unscrew the rubberized footing from inside and keep it near the hard drive.

Get that error fixed ASAP!

Slide the upper portion of your PS3 turning left to remove the screws with arrows imprinted next to it.

Lift off the upper part from the back of your Play Station3 until it voluntarily stops. If the model you are using is the first generation PS3, you need to take out the ribbon cables that are linked to the memory card reader in order to fix a PS3 disk read error. Take off the upper part of the PS3 and keep it near the hard drive.

Pull on the Blu-Ray drive up. Check the power wire connected to the Blu-Ray using a flathead eyeglass screwdriver. Pull put the power cable.

Using your fingernails, you have to release the small black lever that is placed underneath the big silver bluish cable in your PS3. Pick the Blu-Ray drive up and put it down in piece of clean cloth. Remove all the black screws on the upper part of the case. Flip over the drive and lift off the whole silver lid so that you can fix a PS3 disk read error.

You have to take out the disc magnet from the heart of the drive engine and place it near the hard drive. Flip over your drive mechanism. Locate and take away the 4 small black screws that contain the KES400 AAA portion. Take away the 4 metal brackets that are holding down the screws.

Get that error fixed ASAP!

Lift your PS3 up and take away the metal rods that are placed on the drive. Unwrap the black tape on the back and lift the lever up using your fingernail. Remove the defective laser part called KES-400AAA.

Loosen the metal bracket connected to the side portion of your laser or the KES 400AAA part. Take away the tiny black screw that holds the plastic white clip so that you can eliminate PS3 disk read error. Undo the plastic clip so that you can gently remove the KES 400AAA laser.

Mount the fresh laser to the white plastic clip and the metal bracket. Place the disc magnet back into place. Gently reassemble the parts of your PS3. Connect your PS3 and turn on the power. Now that the PS3 disk read error is fixed, you can now insert a game disc and play your game.

This PS3 trouble was not named as red screen of death for nothing. Of all the errors that gamers encounter with the game, the red screen is probably the one of the most common and also impossible [...]]]> When you see the red screen on your PlayStation 3, chances are, you and your console are doomed.

This PS3 trouble was not named as red screen of death for nothing. Of all the errors that gamers encounter with the game, the red screen is probably the one of the most common and also impossible to permanently fix.

The red screen often appears almost immediately after turning the console on. Turning the console off and turning it back on usually does the trick, but this is only a temporary cure to the problem. Note that the red screen is caused by overheating. So better leave the console on stand by for at least 30 minutes to let it cool down…unless you’re ready to shell out a couple of hundred bucks for Playstation red screen fix.

Get Rid Of The Red Screen Right Away

Should the red screen persist (even when the hard drive has cooled down), the problem may be technical. This case calls for the attention of an expert. Bringing the console to Sony to have a permanent Playstation red screen fix can be the best idea. However, owners should wait for at least six weeks and pay for $150-$200 for the service.

Those on tighter budget can find a whole range of self-help articles from the Internet that suggest several remedies for the red screen of death. Some of these usually involve the use of a heat gun and cooling appliances like electric fans. The trick is to disassemble the console and have the motherboard cool down using a fan while the compartments are warmed up using a heat gun.

Another temporary Playstation red screen fix is unplugging all cables and plugging them back again. Similar to the YLOD or yellow light of death, the red screen may have sprung from faulty or lose connections of the cables.

If all these don’t work, it is high time to consult downloadable instructional manuals, photos or videos. This way, console owners can have a quick Playstation red screen fix right inside their very home without forking out large sum of money for repairs from experts.

Some of these digital manuals and kits can be reliable. However, it is a must to observe utmost care in doing all the procedures, as the internal parts of the console are super sensitive. It is also imperative for the gamers to check on the credential of the kit developer. Look into reviews and search for additional information about the brand. Nobody would really trust a repairman who has little experience and knowledge in Playstation red screen fix.

Remember that no play station error can be too much to fix with the help of an expert. It is always better to prepare shelling out few dollars that to compromise your gadget investment, much more when the console is one of your prized possession. While there can be whole range of options to fix or troubleshoot errors, being wise enough with your repair methods cannot only give long hours of enjoyment but may as well make the money spent worth it.

Get Rid Of The Red Screen Right Away

For many game players, red stands as the color of doom (for the console, at least) especially when it comes with an error message that goes, “A serious error has occurred. Contact technical support for assistance.” Most console owners [...]]]> Roses may be red, but this color shouldn’t fill in the screen of your PlayStation 3.

For many game players, red stands as the color of doom (for the console, at least) especially when it comes with an error message that goes, “A serious error has occurred. Contact technical support for assistance.” Most console owners are left mad and disappointed. Some, however, manages to calmly fix the problem and search for quick PS3 red screen fix.

Causes of the Red Screen

Note that the PS3 console is manufactured without a cooling system. Having the PlayStation operate for long period of hours may result to the overheating of the system, thus causing the Red Screen of Death. The best way to avoid the problem along with other errors is to place the unit away from the wall.

Permanent PS3 Red Screen Fix – Click Here

This way, you can avoid obstructing the airflow. Placing the console directly to the direction of air from a fan may also serve as a make-shift cooling system, and sometimes be a quick PS3 red screen fix.

Hard drive defects may also be the ones causing the red screen troubles. In such cases, it is best to install other hard drives borrowed from a friend to test whether or not this is the root of errors.

There are also various remedies which game players can perform to have a quick PS3 red screen fix:

1. Turn off the console and turn it back on.
2. Reset the PS3.
3. Place the PS3 into standby mode. When the red light appears, hold the power button for three to five seconds and wait for two beeps. This is effective, most of the time, but the method is notorious for disrupting the data from the hard drive.
4. Shut the console down and remove all the cables from the plugs save for the power cord. After few minutes, plug them back in. This is guaranteed to work, especially when the red light is caused by loose cables.
5. Consult with the user’s manual. Try taking out the hard drive and assembling it back again.

Keep in mind, however, that the red screen may be an indicator of more serious problems. There may be errors that cannot be solved through temporary PS3 red screen fix. Thus, bringing the console to Sony can be the safest option. Having the console fixed by the company, however, entails a payment of more that $150 if the unit’s warranty has expired. It would also take around two to six weeks before owners can have their consoles back.

Consulting the local repair shop would be a sound option, but PS3 red screen fix may cost around $100 to $200. There is also no guarantee on the quality of repair, especially when the shops do not have enough experience in repairing gaming consoles.

Do-it-yourself fix instructional manuals and guides can be downloaded from the Internet at a lower cost. This usually gives the owner an opportunity to be hands-on in troubleshooting the PS3. Repairing the console yourself, however, is not recommended when you are not skilled enough to disassemble and reassemble the compartments and parts of the PS3.

Permanent PS3 Red Screen Fix – Click Here

Looking out for the quickest way to fix the problem would [...]]]> There exists an indescribable excitement felt by a gamer inserting a new disk on the PlayStation 3 for the first time. With the adrenaline rush and uber high expectations, it would all be too disappointing to find that the console has troubles reading disks.

Looking out for the quickest way to fix the problem would be the first instinct of console owners. Then again, there is a need for them to know the reason behind PS3 disk problem just so they can find more permanent solutions and perform measures to avoid having these errors again.

Solve PS3 Disk Problems for Good

Possible reasons for PS3 Disk Problem and ways to solve them:

 1. Dirty disks

Sometimes, the main reason why the disk isn’t loading or playing in the console is because it is not clean. Cleaning the disk would then be the first remedy.

Experts recommend that owners utilize a lint-free cleaning cloth. Gadget stores have made special fabrics available that are well-suitable to be used for cleaning CDs and DVDs. Avoid using paper towels or a T-shirt for it may only leave the disks dirtier than ever.

Do NOT insert CD or DVD drive cleaners into the console as this might damage the system.

2. Incompatible disk

It might be that the reason behind the PS3 disk problem is the console’s incompatibility with the disc. In such cases, try inserting the disc into other players. It would also help to load another disc into the PS3 to identify whether the problem is with the CD or with the console itself.

3. Too much Game Data

When the game disc is not loading, try going to Game > Game Data Utility and determine the game data of the disc that is being loaded into the console. Highlight the icon and delete the game data. Try reinstalling or reloading the game disc.

4. Damaged Files on the Hard drive

Damaged files may be the cause of the PS3 disk problem. You can solve this trouble by activating the console’s safe mode, then select restore file system. Note: Be sure to backup the data before restoring the file system.

5. Backward Compatibility

Resources from the net have pointed to the issue of the console’s compatibility to software game titles. Several models of PS3 such as the CECHA01, CECHE01, and CECHB01 can be compatible to the software game titles of the PS2. However, some models may not be able to read the disk compatible to older units of the console, thus resulting to a PS3 disk problem. Be sure to check on the model number of the console at the back. Having a list of the game title compatible with the PS3 model can he handy. The Internet gives a quick list of game title suitable to be loaded in specific models of the PS3.

Other remedies that new owners can perform includes the rebooting of the console and checking on loose cables. It is always better to unplug all the cables and plug them all back to make sure that everything is connected properly. Consult the manual for the right connections.

Solve PS3 Disk Problems for Good

Most of the gamers would agree that there is nothing more disgusting than the game stopping while the action is on full blast just because of a faulty connection or difficulty of [...]]]> Enjoying a game with the PlayStation 3 is one thing. Being interrupted by the yellow light of death or YLOD, however, is another.

Most of the gamers would agree that there is nothing more disgusting than the game stopping while the action is on full blast just because of a faulty connection or difficulty of the console to read data. Users have constantly pointed out that errors like the YLOD have caused them to turn away from the PS3 and patronize other game console.

Others would simply want a permanent fix for YLOD to stop spending over a couple of hundred dollars just to get the PS3 running again. While a lot of instructional materials are available online, these may not guarantee a long lasting solution for the PS3. Having the console inspected and fixed by Sony is a good option, but the price can be hefty.

Click Here – Permanent Fix For YLOD

This is the reason why a lot of gamers would simply prefer to play repairman and experiment with their skills as a techie to discover a permanent fix for YLOD – without exhausting their savings and waiting for forever to get their hands back on their favorite console.

A quick consultation with few materials found in the Internet suggests that owners should first determine the cause of the problem just so they can find a permanent fix for YLOD.

Even the creator of PS3, Sony itself couldn’t identify the definite cause of the YLOD. As of this writing, the company refuses to acknowledge that the error arouse from faulty manufacturing process. Then again, there is a big possibility that YLOD and other troubles arise from loose connections inside the motherboard. Experienced gamers have also pointed the accumulated dust inside the console as the reason behind the errors.

In such cases, one needs to have a heat gun, flat blade screw driver, isopropyl alcohol and vacuum cleaner (can be replaced with a compressed air blower). The steps below may give a permanent fix for YLOD, should the owner be careful in handling the console. Remember that these can only lead to a temporary solution if the gamer is not too careful.

How to Permanently fix the YLOD

• Use the small flat blade screw driver to remove the cover plate and open the console.
• Take off the ribbon cable with utmost care, by simply lifting the black part of connector.
• Lift or tilt the blu-ray drive to the right and disconnect the power cable along with the large ribbon underneath the tab.
• Unscrew the PSU, Bluetooth board, blue hard drive, hard drive, the bracket, on/off and eject control panel, sprung brackets, fan and fan power connector, and battery connector. Be sure to do this carefully and avoid breaking anything.
• Clean off the heat sink compound on the two processors and touch plates (at the bottom of fan) using the rubbing alcohol. Remove all traces of the old silk compound.
• Use the vacuum cleaner to remove accumulated dirt and dust from the component parts of the PS3.
• Check for the burn-in marks on the top metal cover plate. Use the heat gun with temperature set to 350 degrees, while cooling off the motherboard with the fan speed at the lowest intensity. Hold the heat gun an inch over the CPU and other compartments.
• Move to the other compartments. Reassemble the console after heating the parts and cooling the motherboard after a few minutes.

Click Here – Permanent Fix For YLOD

One of the most common PS3 problems is the Yellow Light of Death, also known as [...]]]> PlayStation 3 has been one of the major contributors when it comes to the gaming console hype. While a lot of gamers enjoy getting their hands on this gadget, there are a whole range of troubles they often encounter.

One of the most common PS3 problems is the Yellow Light of Death, also known as the YLOD. It is a general error that arises whenever one tries to install a game into the HDD. When the hard drive fails, the YLOD occurs.

Another reason is power surge, along with the dust that had accumulated inside the PS3.

Get The Best Fix For YLOD Here

YLOD is actually an indicator. Notice that before the screen turns yellow, the console’s indicator emits a green light. This should be followed by a quick flash of yellow light, followed by a red screen. The console then automatically shuts down and the owner left with a two hundred dollar-problem.

The best way to get this problem fixed is to bring the console to Sony – that is, if you’re willing to fork out couple of hundred bucks and wait for whole six weeks. Then again, there are quick ways to know how to fix the YLOD that provide several remedies to get the PS3 working again.

The Internet provides numerous materials that give information on how to fix the YLOD. Some are in the form of downloadable digital instructional manuals. Videos showing how to fix the YLOD may also be readily available.

Know that one of the ways to deal with the YLOD is to have a security driver that can replace the PS3 thermal paste with a high quality paste such as arctic silver. According to some self-help Internet sites, this method has been effective only for three percent of owners.

The YouTube community may have also uploaded videos showing ridiculous ways on how to fix the YLOD. Some have recommended using a heat gun for the mother board. Most interestingly, some users have shown ways to fix the problem without actually opening the PS3. One of the methods is to use a hair dryer to heat the system up and sticking the console to the refrigerator for about fifteen minutes.

Reviews have applauded this “home remedy” but no expert has recommended this method, especially since the PS3 would be normally running only for the next two days.

Looking through the other range of options for YLOD troubleshooting, users may also have come across kits that promise a quick fix for PS3 errors and troubles. The instructional manuals and videos have laid out several methods in which users can troubleshoot the YLOD without bringing the console to Sony and spending a fortune. Among the best answers on forums asking how to fix the YLOD are the following:

1. Switch off the Playstation 3 and let it sit for an hour or more to have the system cool down. Turn it back on.

2. Check for loose connections.

3. Remove the hard drive from the console and install it back. For best results, this step can be repeated two to three times. Hard drives are ultra sensitive, though, so there is a need to be extra careful when doing this.

4. Install the system software again.

Remember though that there can be no better way to fix the problem, except bringing the console to professional repairmen from a shop you trust the most. Sony, can of course, give the highest guarantee for fool-proof repair but users with tighter budget can avail more cost-efficient services. Be sure to check on the credentials of the repair shop to avoid bigger PS3 troubles.

Get The Best Fix For YLOD Here